The images below depict some of the systems Inter-Source has engineered for clients.
system-001
Dual 30" system processing steel and aluminum.
system-002
Collection conveyor and coolant transfer station.
system-003
Twin screw system with 40" wringer processing aluminum.
system-004
20" wringer coupled directly to a machining center.
system-005
Vacuum collection system.
system-006
30" wringer processing steel chips in oil.
system-007
Dual conveyor configuration.
system-008
Dual 30" system.
system-009
Parts separator/shredder/wringer configuration.
system-010
20” wringer system.
system-011
20" skid-mounted system.
system-012
30" system processing coolant and aluminum chips.
system-013
A single, central Inter-Source 30” continuous chip wringer supports vacuum transport of wet aluminum chips from two remote central coolant filters, a patented Inter-Source process.
system-014
A 3-stage chip process system first sizes chips in the shredder, then passes them over a vibratory deck to separate chips from large solids.
Large solids enter one recycling stream; the chips move through the wringer where at least 98% of the oil is removed, and are then discharged pneumatically.
