Separation
Separation prior to processing or pucking is essential for many chip streams. Inter-Source has designed several models of separators to ensure we have what best meets your separation needs.

separation-001
Vibratory and static grate separators are used when unwanted objects (rags, trash, etc.) could be frequently introduced into the system. Because these separators are engineered and manufactured by Inter-Source, they are specifically sized to handle your material.

This video depicts solids on a vibratory deck - the chips have already passed through the grating at this point - that are passing through a trap door and out into a solids collection container while the chips that have passed through the grating go on for further processing.


separation-002
Static grate separator, typically installed at satellite locations to separate scrap prior to transport for further processing.


separation-003


separation-004

High-efficiency two-stage separators are typically integrated into the chip processing system to separate stray parts, bar ends and tooling.

Slot screws allow for quick adjustment up and down from the catch basin area to accommodate chip variances with production changes. The easily reversed impingement plate offers a standard square edge and a sawtooth edge for use with lighter alloys or more finely cut chips.


separation-005
This cut-away model illustrates the diverging paths for the separated materials.

separation-006


separation-007

Magnetic separation systems, available in varying sizes, segregate ferrous chips from other alloys.


separation-008
High-volume magnetic separation system utilizing duplex, triple drum magnetic separators.

Clean aluminum chips are pneumatically transported to a remote staging area in preparation for remelt while ferrous material is collected in carts adjacent to the system.