Wringers

Automatic chip processing and successful pucking (chip densification) requires fluid removal via wringers. Inter-Source offers the most comprehensive range of sizes and types, and owns the patents on many critical wringer advancements.

Only Inter-Source guarantees a retained moisture content of 2% or less on processed chips, and typically, the moisture content is substantially lower.

Wringer sizes from Inter-Source.
wringer-001
12" Wringer provides a rapid ROI.
wringer-015
Four of Inter-Source's comprehensive range of sizes are shown. Inter-Source has also engineered other sizes and configurations to solve specific application challenges.

The medical device and pharmaceutical OEM's demand for chip processing on short runs / specialty alloys led Inter-Source to deliver the industry's first 12" wringer.

Warning! Demonstration Purposes Only; Do NOT Attempt!

Double housing construction on all wringers increases safety and reduces noise.
wringer-002
Double housing construction on all wringers increases safety and reduces noise.

Indexable stainless steel wringer screen.
wringer-003

The best screen to optimize drying and throughput is dependent upon the volume, chip configuration and type. This indexable stainless steel screen allows rotation when a section becomes worn, greatly extending screen life.

Inter-Source holds the patent on the innovative indexable slot screen.
wringer-004

Inter-Source holds the patent on the innovative indexable slot screen. Engineered and manufactured in-house, this wear-resistant screen ensures optimal drying and throughput of more abrasive materials.

Only Inter-Source offers automatic belt tensioning.
wringer-005
Automatic belt tensioning eliminates routine maintenance. Only Inter-Source offers this important feature.

Inter-Source wringer blades are designed to be easily removed and replaced, greatly extending wringer life.
wringer-006

Wringer blades are designed to be easily removed and replaced, greatly extending wringer life. Again, only Inter-Source offers this ROI-enhancing feature.

Inter-Source's axial suspension (anti-friction) system.
wringer-007

Inter-Source's innovative ball and socket suspension component.

wringer-008

An axial suspension (anti-friction) system is for more demanding, high volume applications, typically those handled with a 40" or 50" wringer.

Axial suspension promotes wringer life and minimizes installation requirements because no special foundation is required. Balance variations are dampened.

The innovative ball and socket suspension component provides longer equipment life through its greater surface area and dampening properties. This method is typically installed in the 20" and 30" wringer applications.

Inter-Source's hinged access panel and swing-out motor provide complete and immediate access to drive components.
wringer-009

The hinged access panel and swing-out motor provide complete and immediate access to drive components. Wringers can accommodate any conventional motor.

The safety interlock on lid reflects Inter-Source's focus on operator safety.
wringer-010
Safety interlock on lid reflects Inter-Source's focus on operator safety. It ensures that the bowl may not be accessed until it has stopped.

This EN954-I Category 1 device is suitable for Category 3 or 4 classification, depending upon application requirements.

This rugged hinge is representative of the durability, fit and finish found throughout Inter-Source manufactured equipment.
wringer-011

This rugged hinge is representative of the durability, fit and finish found throughout Inter-Source manufactured equipment.
wringer-012
This rugged hinge is representative of the durability, fit and finish found throughout Inter-Source manufactured equipment.
This exclusive urethane seal, made of an extremely tough material, ensures segregation between the processing and mechanical areas.
wringer-013


wringer-014

This exclusive urethane seal, made of an extremely tough material, ensures segregation between the processing and mechanical areas.